Revox B77 MkII

Sold

Revox B77 MkII

800 

excl. VAT

Out of stock

3-moottorinen, 2-raitainen.

  • Huippukunnossa teknisesti – ulkoisesti kotelossa hiukan kulumaa, huomioitu hinnassa.
  • Englannin kielinen manuaali mukaan.
  • Tape transport mechanism: 3 motor tape drive; 2 AC driven spooling motors; 1 AC driven capstan motor, electronically regulated
  • Tape speeds: 3.75 ips and 7.5 ips, electronic change-over, tolerance from nominal +-0.2%
  • Wow and flutter: (as per DIN 45507) At 3.75 ips <0.1%, at 7.5 ips <0.08%
  • Tape slip: Maximum 0.2%
  • Reel size: Up to 10.5” diameter (minimum hub diameter 2.36”). Tape tension switchable for small hub diameters
  • Winding time: Approximately 135 seconds for 3,600 ft of tape
  • Tape transport control: Integrated control logic with tape motion sensor provides
    for any desired transition between different operating modes. Contactless electronic
    switching of all motors. Remote control of all transport functions and electronic timer operation are possible
  • Equalization: (as per NAB) 3.75 ips: 90 microsec/3180 microsec, 7.5 ips: 50 microsec/3180 microsec
  • Frequency response: (measured via tape at -20 VU) 3.75 ips 30Hz…..16kHz +2/-3dB, 50Hz…..10kHz +-1.5dB
    7.5 ips 30Hz…..20kHz +2/-3dB 50Hz…..15kHz +-1.5dB
  • Peak recording level: 514 nWb/m corresponds to 6dB above 0VU
  • Level metering: VU meter as per ASA standard, with LED peak level indicators
  • Distortion: 3.75 ips at 0VU <1%, at 0VU+6dB <2.5% 7.5 ips at 0VU <0.6%, at 0VU+6dB <1.5%
  • Signal to noise ratio: (weighted as per ASA-A) Half track 3.75 ips >64dB,
    7.5 ips >67dB, Quarter track 3.75 ips >60dB, 7.5 ips >63dB
  • Crosstalk: At 1kHz stereo >45dB, mono >60dB
  • Erase depth: At 7.5 ips >75dB
  • Inputs per channel: MIC LO 0.15mV/2k2ohms for low impedance microphones. MIC HI 2.8mV/110kohms for high impedance microphones. RADIO 2.8mV/20kohms. AUX 40mV/220kohms
  • Outputs per channel: (Level at 6dB above 0VU). OUTPUT 1.55V/390ohms adjustable with preset. RADIO 1.55V/4k7ohms adjustable with preset
    PHONES 5.6V/220ohms adjustable with control
  • Connectors for: Remote control of tape transport, Remote control of variable tape speed, Slide projector or crossfade unit (electronics optional)
  • Components: 11 ICs, 1 opto-coupler, 4 triacs, 60 transistors, 33 diodes, 5 LEDs, 2 full wave rectifiers, 3 relays
  • Weight: Approximately 17kg
  • Dimensions: 452 x 414 x 207 mm (W x H x D)
  • Clearance required for 10.5” reels height 464mm, width 538mm
  • Perusteellisesti huollettu juuri; Puhdistus, huollot, voitelut, säädöt, tarkastukset. Painotela uusittu, laakeri uusittu, tarkastettu ja koekäytetty.
  • Mitattu äänitys-/toistokäyrä. Tarkastus, koekäyttö. Huollon on tehnyt nauhureihin erikoistunut huoltoliike. Tarkka selvitys tehdyistä töistä dokumentoitu.

Contact about this product

fields marked with * are required.

Back to top