Revox B77 High Speed

Myyty

Revox B77 High Speed

1 100 

ei sis. ALV

Varasto loppu

Juuri huollettu hyväkuntoinen 2-raituri. High Speed (HS) -versio.

  • Specifications:
    *Tape transport mechanism: 3 motor tape drive; 2 AC driven spooling motors; 1 AC driven capstan motor, electronically regulated
    *Tape speeds: 7.5 and 15 ips, electronic change-over, tolerance from nominal +-0.2%
    *Reel size: Up to 10.5” diameter (minimum hub diameter 2.36”). Tape tension switchable for small hub diameters
    *Tape transport control: Integrated control logic with tape motion sensor provides
    for any desired transition between different operating modes. Contactless electronic
    switching of all motors. Remote control of all transport functions and electronic timer operation are possible
    *Peak recording level: 514 nWb/m corresponds to 6dB above 0VU
    *Level metering: VU meter as per ASA standard, with LED peak level indicators
    *Inputs per channel: MIC LO 0.15mV/2k2ohms for low impedance microphones. MIC HI 2.8mV/110kohms for high impedance microphones. RADIO 2.8mV/20kohms. AUX 40mV/220kohms
    *Outputs per channel: (Level at 6dB above 0VU). OUTPUT 1.55V/390ohms adjustable with preset. RADIO 1.55V/4k7ohms adjustable with preset
    PHONES 5.6V/220ohms adjustable with control
    *Connectors for: Remote control of tape transport, Remote control of variable tape speed, Slide projector or crossfade unit (electronics optional)
    *Components: 11 ICs, 1 opto-coupler, 4 triacs, 60 transistors, 33 diodes, 5 LEDs, 2 full wave rectifiers, 3 relays
    *Voltage selector for 100V, 120V, 140V, 200V, 220V, 240V, 50…..60Hz without conversion, maximum power 80 watts
    *Weight: Approximately 17kg
    *Dimensions: 452 x 414 x 207 mm (W x H x D)
    *Clearance required for 10.5” reels height 464mm, width 538mm

Perusteellisesti huollettu laite; puhdistus, huollot, voitelut, säädöt, tarkastukset. Laskurin hammashihna uusittu, 4 kpl laakereita uusittu, 2 trimmeriä uusittu, lamppuja uusittu, ohjainlaakeri uusittu. Nauhuri on koottu kokonaan uudelleen alkuperäisistä ja kunnostetuista osista.

Mitattu äänitys-/toistokäyrä. Tarkastus, koekäyttö. Huollon on tehnyt nauhureihin erikoistunut huoltoliike. Tarkka selvitys tehdyistä töistä dokumentoitu.

Ota yhteyttä tästä tuotteesta

* merkatut kentät ovat pakollisia.

Sivun alkuun